It is 87% solids, two-component aliphatic roll-down coating. It comes with superior strength and is easy to apply, with good working time and a “Fast Turnaround” floor application. Polyaspartic RC coating is available in Clear, Black, Tan, Wheat/Straw, Pearl Gray, Mist Gray, Medium Grey, and White. Other colors pigments are available
for mixing from Premier Performance Coatings curing times are approximately 1.5 to four hours for low foot traffic and 5 to 8 hours for heavier foot traffic.
Benefits of Polyaspartic
-
Comes with Polyaspartic Extended Cure providing additional
working time compared to the Polyaspartic Fast Cure products. -
It’s non‐yellowing, very tough, with excellent color retention.
-
Good chemical resistance with USES excellent adhesive properties.
-
Highly resistant to staining and marking such as most tire markings
-
Conforms to USDA’s requirements for incidental food contact
-
Formulated to be non‐color changing, abrasive resistant, non‐brittle,
flexible, quick set with impact resistance. -
Excellent UV resistance
Polyaspartic Application
Application range; 45°F to 90°F. Apply the product using a notched squeegee or similar squeegee to move the product over the application area. The product should be back‐rolled using a short nap roller, about 1⁄4” to 3/8”. **Apply in thin films from 5,8 or 10 mils per coat. Do not apply thicker than 10‐12 mils at one time. Recoat Time; apply a second coat as soon as the first coat can be walked on, 1 to 2 hours.
Do you need to prepare your LA concrete
floors for Polyaspartic RC Application?
Premier Performance Coatings offers floor grinders for sale and rental in Los Angeles and the surrounding area.
To ensure the proper bonding and long-lasting of polyaspartic RC coating, you need to ensure the concrete
slab is free from any curing agent, form release materials, oils, wax, moisture, or any material that may affect
bonding. The best way to do this is to diamond grind the concrete floor.